
Turning
Typical turning capability and tolerances:
- Diameter: about Ø10–Ø600 mm
- Length: about 50–3000 mm
- General size tolerance: ±0.02–±0.10 mm
- Precision OD/ID: down to ±0.01 mm (by material/rigidity)
- Roundness: about 0.01–0.03 mm
- Surface finish: Ra 1.6–3.2 μm (fine turn to Ra 0.8 μm)
Metric/UNC threads available with gauge inspection.
For tighter tolerances,
Efficient and stable for rotating geometry. Multiple OD/ID features can be finished in one setup from forged, cast or bar stock.
- Rough / semi-finish / finish-turned
- Optional grinding or surface treatment
- Dimensional reports available on request









