Product Description
Double reduced cold-rolled tinplate is given a partial cold reduction to reach an intermediate gauge, then annealed and given another cold reduction to the final gauge prior to coating with tin. The resulting product is stiffer, harder, and stronger than single reduced cold-rolled tinplate. T inplate is a steel product with a stampable thin steel plate as the base, tin plating on the surface, and multiple protective films . It has the characteristics of corrosion resistance, non-toxic, odorless, glossy surface, light weight, high strength, easy to print, easy to weld and process, as well as a strong adaptability to ambient temperature. Double cold-reduced tinplate is usually supplied with a stone surface finish and a flow-brightened tin coating. When ordering double cold-reduced tinplate, the purpose of manufacture for which the material is intended should be stated. Double r educed cold-rolled tinplate is relatively less ductile than single reduced cold-rolled tinplate and has very distinct directional properties, so for some uses, for example for built-up can bodies, the direction of rolling should be stated.
Specifications
Product Parameters
| Product Name | Double Reduced Cold-Rolled Tinplate |
|---|
| Thickness | 0.18mm-0.50mm |
| Width | 260mm-980mm |
| Length | Support Customization |
| Tin Coating | General: 2.8g or 5.6g,can be produced according to your needs |
| Substrate Type | MR / SPCC / L / D |
| Reference Standard | GB/T 2520,JIS G3303,JIS G3315,DIN EN 10202,DIN EN 10203 |
Surface State of Tinplate
| Surface State | Features |
|---|
| Light Surface | Electroplated tin smooth raw material strip after melting treatment to obtain the glaze,Smooth surface with very fine grindstone pattern |
| Stonetextured Surface | Electroplating tin raw material with the glaze obtained after melting treatment,Grindstone pattern with certain direction |
| Silvercolor Surface | Electroplating tin raw material with the glazed surface obtained after melting treatment,the surface is rough and dull |
| Mattless Surface | The surface of the substrate is rough and dull,and the tin plating layer is not soft melting |
Substrate Type
| Substrate Type | Introduction |
|---|
| MR | The most general steel,steelmaking impurity residue less,excellent mechanical properties and corrosion resistance |
| L | Used for the production of acidic contents (oranges,yellow peaches,pineapples,etc.),and the inner surface of the food cans for iron high corrosion resistance tinplate substrate steel,such tinplate is often calledKPlate |
| D | Used to produce two pieces of high-processing tin plate substrate steel,such tin plate is often called.DIMaterial |
| SPCC | Chinese characteristics,using ordinary hot rollingSPHCProduces,usually used for miscellaneous tank purposes. |
Coating Weight
| Classification | Representation of Tin Coating Weight | Tin Plating Nominal Weight (g/m2) | Minimum Average Tin Plating Weight (g/m2) |
| Equal Tin Plating (E) | 1.1/1.1 | 1.1/1.1 | 1.8 |
| 2.2/2.2 | 2.2/2.2 | 4.0 |
| 2.8/2.8 | 2.8/2.8 | 5.0 |
| 5.6/5.6 | 5.6/5.6 | 10.5 |
| Differentiated Tin Plating (D/A) | 2.2/1.1 | 2.2/1.1 | 2.0/0.9 |
| 2.8/1.1 | 2.8/1.1 | 2.25/0.9 |
| 5.6/1.1 | 5.6/1.1 | 5.05/0.9 |
| 2.8/2.2 | 2.8/2.2 | 2.25/2.0 |
| 5.6/2.2 | 5.6/2.2 | 5.05/2.0 |
| 5.6/2.8 | 5.6/2.8 | 5.05/2.25 |
Chemical Composition
| No. | C | Si | Mn | S | P | Cu | Ni | Cr | Mo |
|---|
| D | 0.12 | 0.03 | 0.6 | 0.05 | 0.02 | 0.2 | 0.15 | 0.1 | 0.05 |
| L | 0.13 | 0.03 | 0.6 | 0.05 | 0.15 | 0.03 | 0.04 | 0.06 | 0.05 |
| MR | 0.13 | 0.03 | 0.6 | 0.05 | 0.2 | 0.2 | 0.2 | 0.1 | 0.05 |
Mechanical Properties & Applications
| Standard Name | Nominal Hardness HR30TS | Strong Yield MPA | Scope of Application |
| T-1 | 49 | 230 /-50 | Drawing requirements,drawn ironing cans,nozzles,nozzles,closures |
| T-2 | 53 | 245 /-50 | Ring and plug,dome,closure,shallow pull and special tank parts |
| T-2.5 | 55 | 260 /-50 | Battery cell,small can cover and body |
| T-3 | 57 | 275 /-50 | Cans and cans,large diameter caps,crown caps |
| T-3.5 | 59 | 290 /-50 | Can body,closure and crown lid |
| T-4 | 61 | 340 /-50 | Can body,closure and crown lid |
| T-5 | 65 | 480 /-50 | Cans and cans |
